The HMS series offers flexibility and economic efficiency: These high frequency flex-shaft internal vibrators can be adapted to every type of application. Heads and shafts can be easily combined and rapidly exchanged to match the right equipment to the job. Unique hybrid heads offer optimum concrete consolidation and movement. Wacker Neuson HMS systems provide reliable performance and quality concrete.

STEEL WOOL PADS FOR FLOOR MAINTAINER

Diamond 14x.125x1-20mm Ultra Value High Speed Wet/Dry General Purpose Concrete

Combination Trowel Blade Bolt On

Finish Trowel Blade 6x14 Bolt On

WHITE POLISHING PAD FOR FLOOR MAINTAINER

Green Scrubing pads for floor maintainers

Black Stripping pads for floor maintainer 

Durable trash pumps in 2 inches discharge & 1/2HP. Designed to pump water containing sand, solids and debris with minimal wear and clogging.

The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertilizer. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.

• One-pass prep for seed or sod
• High filtering grate
• Offset wire mesh finish roller
• Breaks up soil down to 5.5" (14cm) deep

This versatile and highly productive tool is a must have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and trasporting materials around the job site.

• Rakes and Grades
• Flow-through design
• Carries materials

High-torque, heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 50" (127 cm) below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

• 24" (61 cm), 36" (91.5 cm) or 48" (121.9 cm) booms available
• 4" (10.2 cm), 6" (15.2 cm), 8" (20.3 cm) or 12" (30.5 cm) chain widths available
• Heavy-duty nose roller bearing lasts longer providing less "shock" to the trencher assembly and chain
• 3 foot (.9 m) boom configuration

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diametre. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 3000 pounds of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.

The Toro Dingo hydraulic breaker simplifies the tough job of breaking concrete, asphalt, rock or brick during renovation jobs. This rugged unit helps break up footings, sidewalks, foundations and a host of other solid structures. The unique mounting configuration also allows for horizontal alignment, particularly useful in breaking apart walls.

• Dependable Honda® 160cc OHV gas-powered engine   
• Fast, easy, tool-free convertibility to 2 hp Extended-Life DC electrical motor    
• Handles up to three guns    
• Precise pressure control form 400 psi to 3300 psi, for spraying low viscosity primers all the way up to heavy-bodied finish paints    
• Durable chrome-plated cart with telescoping handle    
• Hydraulic fill cap and dip stick for easy access for less mess    
• Heavy-duty paint filter

This fully featured sprayer offers the ultimate in functionality and convenience for the longest days and biggest projects. Capable of supporting the largest tip sizes and multiple guns, you can rely on the power and performance of the Impact® 1140. Recommended for applications using up to 4 guns in large residential, commercial and industrial applications where a wide range of coatings are specified.

The Impact® 440 is ideally suited for residential, property maintenance, and small commercial applications. This high performance electric airless sprayer will apply all standard architectural primer, paints and coatings efficiently.

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. 

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti</p

The easy to use 403 Nailer is the most versatile flooring nailer on the market and comes ready to angle nail 3/8/, 1/2, 5/8, 3/4 and 33/32 In. T & G flooring and will face nail to handle the first and last few strips of flooring. An accessory Nailer Shoe is available for metric flooring including Bamboo ( sold separately) PNI's Preferred-Seating System uses an exclusive ratcheting ram to ensure nails are properly seated to prevent squeaks in the floor. The nail's wide head and grapple barb design provides superior holding power and the patented anti-split nail cuts through wood without splitting your floor. Three lengths of nails will insure you have the right fastener to match up to your sub floor. Porta-Nailers are world-renowned by Pro and DIY Users and are designed to protect pre finished floors and provide the tightest floor possible

Manta III Core Drills features a precision rack and pinion carriage with maintenance-free, double-sealed bearings and a 2 1/2 inch square steel column with ceiling jack. All Manta drill rigs are engineered for positive anchoring to allow for both vertical and horizontal drilling. The feed handle can be mounted on either side for easy drilling close to walls and columns. The lightweight cast-aluminum base and built-in wheels make the Manta line easy to move and maneuver. The carriage assembly easily detaches from column for transport. Control box comes standard with amp meter and a conveniently located power switch.

Compact, lightweight and engineered for maneuverability and reliability, the MK-CX-3 (Honda) can be used for wet or dry cutting. A corrosion resistant, cast-aluminum blade guard that mounts on either left- or right-hand side of saw enables cuts within 1" of wall or curb. Built-in water distribution system supplies water to both sides of blade. The CX-3 features a Poly V-belt for positive power transmission with a sturdy single piece steel motor mount weldment and a 1" diameter blade shaft with self aligning bearings to minimize vibration. The hinged blade guard provides easy access for blade changes and inspection and a folding handle bar for compact transport

Mi-T-M's hand carry electric, single stage 5-gallon air compressors make your jobs easier and more efficient by supplying the extra power you need. The compact & portable twin tank design makes this electric model perfect for remote jobsites.