Product Catalog

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Model Number: HTH181

1/2" Drive

Heavy duty all-metal motor, impact hammer and anvil system - made to hold up in tough environments.

 

Please contact us for current pricing and availability.

  • Manufacturer: Snap-on
  • Model Number: QD3250

Torque Wrench, Adj. Click Type, U.S., Fixed, 50-250 ft. lb., 1/2" driv

Please contact us for current pricing and availability.

  • Manufacturer: Snap-on
  • Model Number: QD1R200

Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 40-200 in. lb., 1/4" drive

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Manufacturer: Snap-on

Be ready for any seperating or pulling jobs with this puller set.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Automatic pump overload system protects against damage to rams and equipment
  • Heavy-walled extension tubes stand up in the toughest situations
  • Flex head features permanently molded rubber pad - interlocked to prevent seperation
  • 1/2 ton capacity hydraulic spreader features 2" jaws and spreads from 5/8" to 3-3/4"
  • 10-ton hydraulic pump

Please contact us for current pricing and availability.

  • Model Number: 2300

Used for waxing and polishes autos, boats, RV's, etc.

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • Model Number: JFHC 200c

Foldable engine hoist

Please contact us for current pricing and availability.

  • Manufacturer: Bluebird Equipment
  • Model Number: KD1500

Lift includes a chain and has a1500 lb weight limit.

Please contact us for current pricing and availability.

  • Manufacturer: Makita Power Tools
  • Model Number: PV7001C

7" Disc up to 2000 rpm

Lightweight for easy operation. Powerul motor for maximum sanding. Ball and needle bearing construction for long life. Double insulated.

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • Model Number: 180420

JET JCP Series Cable Pullers are general purpose cable pullers designed to lift, lower, stretch or pull heavy loads. 1 ton to 4 ton capacities available. Lightweight zinc plated steel construction to resist corrosion. Double solid cast aluminum ratchet wheel brake system hold load securely in any position. Concealed spring lever control prevents accidental release. Drop forged hooks with safety latches standard. Aircraft quality 3/16" cable. Snatch block included with JCP-2 and JCP-4 models. Complies with ANSI/ASME B30.21 standards

Please contact us for current pricing and availability.

  • Model Number: 587730

JET 30" Black Head Center-Cut Bolt Cutter is specially designed to produce superior cutting force. The high-carbon alloy tool steel jaws are ideally suited to cutting rebar, medium tensile and soft bolts, rods, rivets, bars and chains with a maximum hardness of HRC-40. Designed with safety in mind, these bolt cutters exceed Federal Specifications and are sure to give you the quality and performance you've come to expect from JET

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • SKU: 724593
  • Model Number: 220019

JET 5/8" Capacity REBAR CUTTER BENDER -- Can be bolted to floor or board for easy one-hand operation. Patented design uses needle bearing for easy cutting. Cuts and bends grade 60 rebar. 5/8" Capacity; 52" length. Jaws are made of high-carbon alloy tool steel, HRC-48. See True Value #724593

Please contact us for current pricing and availability.

  • SKU: 724664
  • Model Number: TJ2000X

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • Model Number: 140175

JET 27" x 48" Forks, 6000-LB Capacity PALLET TRUCK -- 200 degree turning radius. Articulating 7" poly-over-aluminum steer wheels. One piece cast pump with high quality seals, hardened and chrome plated ram and piston, top-of-stroke and overload safety bypass valves. Single point valve replacement for quick and easy rebuild. Rounded fork tips with nylon guide rollers for trouble free pallet entry and exit. Solid steel push rods. Wheel bearings are double sealed and lifetime lubricated

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • Model Number: 453323K

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

Please contact us for current pricing and availability.

  • SKU: 724635
  • Model Number: 454223

JET 3-Ton SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • SKU: 724643
  • Model Number: 441315

JET 15-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional. See True Value # 724607

Please contact us for current pricing and availability.